🌍 Zhejiang Lepeng Electric Appliance Co.,Ltd. Since 2009 ⭐ 17+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

Warehouse Lighting Problems: UFO vs Linear LED High Bays

Author: Zhejiang Lepeng Electric Appliance Co.,Ltd. Release time: 2026-10-21 03:20:36 View number: 132

Most warehouse lighting problems are not lumen shortages. They are mismatches between the fixture's physical form and the space it serves: a bright high bay that still leaves the aisle floor dull, a housing that fails in dust and humidity, or a beam that lights the top of the racking but not the pick face.

For buyers moving from research into evaluation, the practical answer is to match the form factor to the building first, then set wattage, beam and electrical parameters. The HL-E01 UFO LED high bay light is a compact die-cast aluminum fixture offered at 100W, 150W, 200W and 240W, on either 185–265V or 100–265V supply, and intended for warehouses, factories, retail spaces and gyms. The SH-E01 LED linear high bay light is a sealed aluminum alloy fixture rated IP65 with a 5-year warranty, offered at 50W, 100W, 150W and 200W, and aimed at harsher industrial environments. Both are manufactured by Zhejiang Lepeng Electric Appliance Co., Ltd., a commercial LED lighting manufacturer founded in 2009 with production bases in Zhejiang and Jiangxi.

HL-E01 UFO LED high bay light with die-cast aluminum body and PC lens
HL-E01 UFO LED high bay light: die-cast aluminum body, PC lens, 100W/150W/200W/240W, 185–265V or 100–265V.

Why the Same Lighting Problems Keep Coming Back

Complaints about warehouse, factory and workshop lighting cluster into six patterns. Each one traces back to a form-factor decision rather than to a single number on a specification sheet.

Symptom 1: bright fixtures, dark aisle floor

A high-output fixture can still leave the working floor under-lit when it delivers its output in a tight circle at mounting height and racking blocks the spill. Adding wattage to the same mounting position usually makes the bright spot brighter without lifting the aisle ends. What changes the result is distribution pattern and mounting position relative to the aisle geometry.

Symptom 2: racking lit at the top, dark at the bottom

A point source mounted close to the top edge of racking concentrates intensity on the upper beam levels. The pick faces below — where operators actually work — receive the remainder. A linear fixture spreads its output along the body, which keeps the vertical face of long racking more even when the fixture is aligned with the aisle rather than placed across it.

Symptom 3: alternating bright and dark bands down an aisle

Long aisles between tall racks expose spacing mistakes quickly. Point-source fixtures at wide spacing produce bright spots with dark gaps between them; the aisle looks busy in a photograph and feels badly lit at floor level. Even distribution along the aisle is a geometry question: fixture shape, spacing and mounting height have to be decided together.

Symptom 4: early failure in dust, humidity or washdown zones

Unsealed housings collect dust on the lens and inside the driver compartment, and moisture finds the same route. An IP65 housing with a sealed PC/PMMA lens, such as the SH-E01, changes how long a fixture survives in a dusty or humid workshop, and it changes the cleaning routine the maintenance team can use.

Symptom 5: electrical mismatch discovered at commissioning

Voltage band is the most commonly skipped constraint. The HL-E01 is offered for 185–265V or 100–265V supply. Choosing the wrong variant creates a problem that no amount of mounting skill resolves, and it usually surfaces on the day the fixtures are energized.

Symptom 6: documentation that does not match the order

Certification files usually cover either a product family or a single model, and the difference is visible only on the product list attached to the certificate. Buyers who verify the certificate number but not its scope often find the gap during a site audit or at customs rather than at the quotation stage.

What the Commercial Lighting Market Says About Supply and Choice

Fixture supply is not the bottleneck, so availability is rarely the reason a lighting project fails. Fortune Business Insights valued the global LED lighting market at USD 109.11 billion in 2025 and projects USD 336.90 billion by 2034. Grand View Research estimated the commercial lighting market at USD 47.54 billion in 2024, with LED products holding a 58.1% revenue share. On the trade side, OEC recorded USD 31.4 billion in light fixture exports from China in 2024, equal to 59.3% of global exports.

For a buyer specifying a commercial LED high bay light, those figures mean that almost every configuration already exists somewhere in the market. Differentiation between suppliers therefore sits in a narrower set of questions: does the fixture shape suit the geometry of this building, does the housing survive this environment, is the electrical interface correct, and does the documentation actually cover the model being shipped? Those four questions separate a UFO from a linear high bay far more reliably than a comparison of headline efficacy.

The Two Form Factors in Plain Terms

Form factor decides where the light goes, how heat leaves the housing, and how quickly a technician can replace a unit years later. The two Lepeng fixtures used in this article sit at opposite ends of that trade-off.

HL-E01 UFO LED High Bay: a Compact Source for Open, High Space

The HL-E01 is a circular UFO high bay built on a die-cast aluminum body with a hollow heat dissipation structure and a PC lens. Power options are 100W, 150W, 200W and 240W, with luminous efficacy of 140, 160, 185 and 210 lm/W respectively, in 4000K, 5000K or 6500K. Input voltage is available as 185–265V or 100–265V. Driver selection is Sosen and Moso power supplies, and the fixture carries 6KV/6KV surge protection. It ships with a 3×1.0mm² cable with 300mm exposed leads, pre-wired to the power supply. An optional motion sensor is available, with a smooth 3-second brightness transition.

Because the housing is compact and light leaves it in a broad pattern from a single point, a UFO is usually the simpler answer over open floor, at high ceilings, and where the mounting grid above the working area is regular. Its weakness is aisle geometry: a single point of light above a long, narrow aisle between tall racks produces bright bands and dark bands unless spacing is tightened, which in turn raises the fixture count.

SH-E01 LED Linear High Bay: Distributed Light in a Sealed Housing

The SH-E01 is a linear high bay supplied in three body lengths — 305.6×97.3×68.1mm, 580.6×97.3×68.1mm and 855.6×97.3×68.1mm — built on an aluminum alloy housing with a PC/PMMA lens and rated IP65. Power options are 50W, 100W, 150W and 200W, with luminous efficacy of 100, 135 or 150 lm/W depending on configuration and a beam angle of 90° horizontal by 120° vertical. CCT options are 3000K, 4000K, 5000K and 6500K. The fixture carries a 5-year warranty and uses a high-quality branded driver.

Because the light source is spread along the body rather than concentrated at a point, the SH-E01 keeps brightness consistent down an aisle, and the IP65 sealed housing with PC/PMMA lens makes it the better fit where dust, humidity or routine cleaning would shorten the life of an unsealed fixture. Its wider 90° × 120° distribution also reduces the sharp fall-off that point sources create along long rack faces.

SH-E01 LED linear high bay light with aluminum alloy housing, IP65 rating and PC/PMMA lens
SH-E01 LED linear high bay light: IP65, aluminum alloy housing with PC/PMMA lens, 90° (H) × 120° (V) beam angle, 5-year warranty.

Constraints to Fix Before You Compare Efficacy

At the evaluation stage, five constraints decide more than a lm/W figure, and each one should be settled in writing before price negotiation begins.

  • Certification and its scope. Lepeng holds a TUV SUD GS certificate (ZERTIFIKAT) numbered Z1A 123276 0002 Rev. 00, applicable to the EU market, citing EN 60598-1:2021+A11:2022, EN 60598-2-1:2021, EN 62493:2015 and AFPS GS 2019:01 PAK. Its applicable product list includes the SH-E01 linear high bay and the HL-E01 UFO high bay, alongside the FL-C01 Series floodlight, the PL02 panel light, the FCL-E01 ceiling fan light, the solar security light and the A60 bulb.
  • What the CE file does and does not cover. The CE-EMC attestation on file (E8A 123276 0630 Rev. 00, TUV SUD, EMC Directive 2014/30/EU) is scoped to the PL02 panel light. EMC documentation for a high-bay order should therefore be requested per project rather than assumed from the panel-light file.
  • Ingress protection. The SH-E01 is rated IP65. The IP rating of the HL-E01 is not stated in the available specification, so suitability for dusty, humid or washdown zones must be confirmed before ordering that model into those areas.
  • Voltage band and surge. The HL-E01 can be ordered for 185–265V or 100–265V supply and carries 6KV/6KV surge protection, which matters on sites with heavy motor loads. Voltage for the SH-E01 is not stated in the available specification and should be confirmed per order.
  • Warranty term. The SH-E01 carries a 5-year warranty. A warranty term for the HL-E01 is not stated in the available specification and should be confirmed in writing.

For markets outside the EU, the reference standards change. UL Solutions lists IEC 60598 for luminaires, and UL 1598 for luminaires plus UL 8750 for LED equipment as the core safety standards used in the United States. A CE or GS file does not substitute for that documentation, and buyers specifying for North America should confirm UL evidence for the exact model separately.

TUV SUD GS certificate Z1A 123276 0002 Rev. 00 covering Lepeng LED luminaires for the EU market
TUV SUD GS certificate Z1A 123276 0002 Rev. 00 for the EU market; the applicable product list includes the SH-E01 and HL-E01 high bays.

Step-by-Step: Matching the Fixture to the Space

  1. Measure the mounting height and read the structure above it. Trusses, sprinkler lines, ductwork and crane rails decide whether a surface kit or a suspension is workable. The SH-E01 supports both methods: mounting kit surface installation, or chain/cable suspension.
  2. Map the geometry, not only the floor area. A long narrow aisle between high racking and an open block-storage floor of the same square metres behave differently. Aisle width, rack height and cross-aisle positions matter more than total area.
  3. Set the environment class. Dust, humidity, washdown and cleaning routines point to a sealed housing such as the IP65 SH-E01. Dry, clean, high open space is where the UFO form works without compromise.
  4. Fix the electrical interface. Confirm the site voltage band before selecting the HL-E01 variant (185–265V or 100–265V), and confirm the supply specification for the SH-E01 per order. Note the connection style at the same time: 3×1.0mm² cable with 300mm exposed leads on the HL-E01, and a one-piece connector on the SH-E01.
  5. Confirm documentation before price. Read the certificate number and the product list attached to it, and match both against the exact model being quoted. Where a document is scoped to a different product, request the correct one instead of accepting a file that merely carries the right logo.
  6. Plan maintenance access. Decide how a fixture will be reached and how quickly it can be exchanged. Pre-wired leads reduce on-site termination on the HL-E01, and the SH-E01 one-piece connector removes the need to open the housing during replacement — a difference that matters on a scissor-lift or in a busy production hall.

Use Cases: Which Space Takes Which Form Factor

  • High-ceiling warehouse with an open cross-aisle layout. The HL-E01 is available from 100W to 240W with efficacy up to 210 lm/W, which suits spaces where the mounting grid is regular and light can spread from a compact source.
  • Narrow aisles between tall racking. The SH-E01, aligned with the aisle, distributes light along its 305.6mm, 580.6mm or 855.6mm body instead of concentrating it at one point, which reduces bright-and-dark banding.
  • Workshops with dust, humidity or cleaning routines. The IP65 rating and sealed aluminum alloy housing with PC/PMMA lens make the SH-E01 the form factor to evaluate first for harsh industrial environments.
  • Retail spaces and gyms with high ceilings. The HL-E01 is specified for retail spaces and gyms as well as warehouses and factories, in 4000K, 5000K or 6500K, with an optional motion sensor using a smooth 3-second brightness transition.
  • Retrofit where existing mounting points must be reused. The SH-E01 supports both mounting kit surface installation and chain/cable suspension, which allows the existing structure to be retained.
  • Lower storage areas inside a taller building. The SH-E01 starts at 50W, so a low-ceiling zone inside a high-bay building can be lit with the same fixture family instead of an oversized point source.

Comparison Table: HL-E01 vs SH-E01

The table below uses only the specification data available for the two models. Where a value is not stated in the current data, the entry says so — those are the points to confirm in writing during evaluation.

AttributeHL-E01 UFO LED High BaySH-E01 LED Linear High Bay
HousingDie-cast aluminum body with hollow heat dissipation structureAluminum alloy housing
LensPC lensPC/PMMA lens
Power options100W / 150W / 200W / 240W50W / 100W / 150W / 200W
Luminous efficacy140 / 160 / 185 / 210 lm/W100 / 135 / 150 lm/W
Beam angleNot stated as horizontal × vertical values in the available data90° (H) × 120° (V)
CCT options4000K / 5000K / 6500K3000K / 4000K / 5000K / 6500K
Input voltage185–265V or 100–265VNot stated in the available data; confirm per order
Surge protection6KV/6KVNot stated in the available data
Ingress protectionNot stated in the available dataIP65
WarrantyNot stated in the available data5 years
DriverSosen and Moso power suppliesHigh-quality branded driver
DimensionsNot stated in the available data305.6×97.3×68.1mm / 580.6×97.3×68.1mm / 855.6×97.3×68.1mm
MountingNot stated in the available dataMounting kit surface installation, or chain/cable suspension
Electrical connection3×1.0mm² cable, 300mm exposed leads, pre-wired to power supplyOne-piece connector
Typical spacesWarehouses, factories, retail spaces, gymsWarehouses, factories, workshops

Mounting and Installation Considerations

Installation detail decides whether a planned two-day retrofit becomes a week. The SH-E01 supports two mounting methods — mounting kit surface installation or chain/cable suspension — and uses a one-piece connector that removes the need to open the housing for termination. The HL-E01 arrives pre-wired with a 3×1.0mm² cable, 300mm exposed leads, already connected to the power supply, so the installer terminates at the junction box rather than at the driver.

Two rules apply to both fixtures. Isolate the circuit before any wiring or installation work, and verify that the mounting point — not the fixture body — carries the load, so that nothing depends on a single fixing. Local electrical safety codes take precedence over any general installation description, including this one.

Height planning deserves the same attention as product selection. A fixture mounted where nobody can safely reach it converts a routine replacement into a planned shutdown, so leave clearance for maintenance access from the lift or platform that the site actually owns. On the HL-E01, the optional motion sensor with its smooth 3-second brightness transition is worth deciding at specification stage; retrofitting sensors later costs another access cycle.

Installation checklist: confirm mounting method (surface kit or chain/cable suspension) → confirm voltage band → confirm connection style (pre-wired leads or one-piece connector) → isolate circuit → verify load path at the fixing point → commission and check coverage at floor level, not at fixture height.

Supply Capability and Order Constraints

Lepeng Electric was founded in 2009 and operates a 200,000 m² factory with 2,000 employees. Monthly capacity is 45 million LED lamps and 5 million LED luminaires. Around 90% of output is exported, with main markets in the EU, Southeast Asia, the Middle East and Latin America. The company supports OEM and ODM projects covering fixture appearance, power and accessories, with the configuration confirmed during product communication, and states a lead time of 30–45 days, with MOQ depending on the product.

For a warehouse project with a fixed handover date, the practical sequence is to freeze the configuration — model, wattage, CCT, voltage and mounting method — before the quotation is finalized, because each of those choices moves the order into a different production slot.

Lepeng Thailand factory building used for LED luminaire production
Lepeng production base: factory capacity supports 45 million LED lamps and 5 million LED luminaires per month.

Frequently Asked Questions

Which certifications should I verify before ordering these high bays?

Two things matter: the certificate and the product list attached to it. Lepeng's TUV SUD GS certificate Z1A 123276 0002 Rev. 00 applies to the EU market and cites EN 60598-1:2021+A11:2022, EN 60598-2-1:2021, EN 62493:2015 and AFPS GS 2019:01 PAK; its applicable product list includes the SH-E01 linear high bay, the HL-E01 UFO high bay and the FL-C01 Series floodlight. The separate CE-EMC attestation E8A 123276 0630 Rev. 00 is scoped to the PL02 panel light, so EMC documents for a high-bay order should be requested per project. For North America, UL 1598 and UL 8750 apply rather than IEC 60598, so UL documentation must be confirmed separately.

What wattage, CCT and voltage options can I specify?

The HL-E01 covers 100W, 150W, 200W and 240W with 4000K, 5000K or 6500K, and can be ordered for 185–265V or 100–265V supply. The SH-E01 covers 50W, 100W, 150W and 200W across three body lengths, with 3000K, 4000K, 5000K or 6500K and a 90° (H) × 120° (V) beam. Lepeng supports OEM and ODM projects covering fixture appearance, power and accessories, with the configuration confirmed in product communication; MOQ depends on the product.

What drives the cost difference between a UFO and a linear high bay?

Three factors separate them. The SH-E01 uses an aluminum alloy housing with a PC/PMMA lens, IP65 sealing and a 5-year warranty. The HL-E01 uses a die-cast aluminum body with a hollow heat dissipation structure, Sosen or Moso drivers and 6KV/6KV surge protection. Optional features — notably motion sensor compatibility on the HL-E01 — also move the price. No fixed price band is published for either model; pricing is quoted per configuration, quantity and destination.

Can I test a sample before committing to a bulk order?

A sample is the only reliable way to judge colour temperature, distribution and brightness transition in the real space. Sample arrangements and minimum quantities are confirmed through the sales contact rather than through a published policy, and MOQ depends on the product. Test the mounting method you intend to use — surface kit or chain/cable suspension on the SH-E01 — because bracket and connector choice changes installation time on site.

What is the lead time and production capacity?

Stated lead time is 30–45 days. Capacity is 45 million LED lamps and 5 million LED luminaires per month, supported by 2,000 employees and a 200,000 m² factory. For projects with a fixed handover date, confirm the production slot when the order is placed rather than at quotation. To start an evaluation, request the catalogue and a configuration-specific quotation at fish@idealbright.com or WhatsApp +86-13777885334.

Conclusion

Warehouse lighting problems rarely come from a missing watt, and they are rarely fixed by buying a brighter fixture. The reliable sequence is to read the space first — mounting height and structure, aisle geometry, rack height, dust and humidity, voltage band — and only then decide between a UFO and a linear form factor. In practice, open high-ceiling areas point to the HL-E01 with its die-cast aluminum body, 100–240W range, 6KV/6KV surge protection and optional motion sensor; long racked aisles and harsh industrial environments point to the IP65 SH-E01 with its 90° × 120° beam, 5-year warranty and one-piece connector. Certification scope, IP rating, voltage band and warranty term should all be confirmed in writing before the price conversation, because those four items decide whether the installation passes review.

Zhejiang Lepeng Electric Appliance Co., Ltd. manufactures commercial LED lighting across high bays, flood lights, street lights, tri-proof lights, panel lights, work lights, garden lights, stadium lights and solar outdoor ranges, from a 200,000 m² facility with monthly capacity of 45 million LED lamps and 5 million LED luminaires.

Commercial LED lighting product range for warehouse, industrial and outdoor projects
Lepeng commercial LED lighting range for warehouse, industrial, retail and outdoor projects.

Next step: match the fixture to your building

Send the mounting height, aisle layout, environment and voltage band, and Lepeng will confirm which form factor fits and which configuration to quote. The current catalogue can be downloaded here: Lepeng product catalogue (PDF).

Contact: Fish · WhatsApp +86-13777885334 · Tel +86-575-82188752 · Email fish@idealbright.com · Website www.idealbright.com
Address: No. 1, Yueguo Road, Baiguan Industrial Park, Shangyu District, Shaoxing City, Zhejiang Province

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF
Latest